Battery
• The Outdoor Motion Detector uses two AA lithium batteries as its
power source.
• The Outdoor Motion Detector features low battery voltage
detection. When low battery is detected, a low battery signal will
be sent to the Sync hub along with regular signal transmissions
for the Sync hub to display the status accordingly.
To Change Battery:
Step 1: Navigate the Sync hub into Programming mode using the Yale
Home app
Step 2: Remove the Outdoor Motion Detector from mounting position
and unscrew to open top cover.
Step 3: Remove the old batteries and press the tamper button a few
seconds to fully discharge.
Step 4: Insert two new AA Batteries.
Step 5: Screw back the top cover.
Step 6: Mount back the Outdoor Motion Detector to mounting
location.
Step 7: Navigate the Sync hub to exit Programming mode and
return to operation mode in the Yale Home app. The
procedure is complete.
Supervisory Signal
• After installation, the Outdoor Motion Detector will automatically
transmit Supervisory signals periodically to the Sync hub at
random intervals of 30 to 50 minutes.
• If the Sync hub has not received the signal from the
Outdoor Motion Detector for the preset period of time, the Sync
hub will indicate on its display that the particular Outdoor Motion
Detector is experiencing an out-of-signal problem.
