Chapter 3 Wireless LAN Cards Monitor Utility
41
After you add several profiles into
Preferred networks,
you can change the order in which
connection attempts to preferred networks are made. Just select the target wireless network
and click
Move up
or
Move down
to move it to a desired position.
To Access Certain Wireless Network Only
If you just want to access certain wireless network type, click the
Advanced
button
on the
Wireless Networks tab (Figure 3-12) to open the
Advanced
window. You can choose to
connect to the following networks:
•
Any available network ( access point preferred)
•
Access point (infrastructure)
•
Computer-to-computer (ad hoc)
The default network type is
Any available network ( access point preferred)
. In this
network type, your device will connect to any Access Points or Wireless LAN Cards (Ad-Hoc
mode) available in the air but Access Point always demands higher connection attempt
priority.
Once you finish the advanced setting, your wireless station will then connect to your desired
network and the connected network will be listed under
Available networks
.
