YAKUMO DELTAX GPS, Manual

Page: 70 / 120

Copy (rather than synchronize) files between your Yakumo deltaX GPS and
desktop computer.
Add and remove programs on your Yakumo deltaX GPS.
Pass through your desktop computer to a network or the Internet to perform
tasks such as downloading IMAP4 e-mail messages or browsing the
Internet on your Yakumo deltaX GPS.
Ways of Connecting to Your Desktop Computer
CAUTION: Do not shut down or restart your desktop computer while your Yakumo deltaX
GPS is connected. Turn off your Yakumo deltaX GPS or disconnect the cable before you
shut down your desktop computer.
You can connect your Yakumo deltaX GPS to a desktop computer in several
ways:
Use the ActiveSync cable or USB cradle (optional) (See step 8 of section
1.4 for information.)
Use the IR port in place of using a cable. IR ports can be found on many
notebook computers; however, on a desktop computer, you may need to
install and configure an IR port. To install the port, follow the
manufacturer’s instructions. (For complete instructions on connecting to
your desktop computer by infrared, refer to ActiveSync Help on your
desktop computer.)
Use a network or dial-up connection. You can synchronize while connected
to your desktop computer by a dial-up connection or over a LAN (Local
Area Network).
Synchronizing Data
Once you have created a partnership and completed the first synchronization,
you can initiate synchronization from your Yakumo deltaX GPS.
To Synchronize from Your Yakumo deltaX GPS
1. Connect your Yakumo deltaX GPS to your desktop computer.
2. On your Yakumo deltaX GPS, tap
ActiveSync
.
60