7
SN Component
Explanation
7
Micro SD card
slot
Contains Micro SD card inside
8
Microphone
For voice input of Bluetooth function
9
Light sensor
For automatic backlight adjustment
10 Reset
key
Press to restart (reset) the system with the
stylus
1.2 Power Supply & Charging
Charge the GPS navigator fully with the charger before first use.
1.2.1 Power Supply
The GPS MN100 can be powered by the built-in battery or external power
supply.
When the GPS navigator is unconnected to the charger, it is powered by the
Li-polymer battery. The battery capacity icon
in the system main
interface shows current residual battery capacity.
When the GPS navigator is connected to the charger, it is powered by external
power and the battery is charged.
[Attention] The GPS navigator adopts internal non-removable Li-polymer
battery. To avoid battery rupture, explosion, release of hazardous substance or
burn, do not unpack, pierce, strike on or discard the battery in fire or water.
1.2.2 Charging by Charger
The GPS navigator must be charged with the charger before first use.
Plug the USB terminal of the charger into the USB port on the left side of the
GPS navigator and the other to the power socket to supply power and charge
the GPS navigator.
Summary of Contents for MN100
