60
Select
MS ACTIVESYNC
and tap
to save the setting.
2. Install the application
Mobile Device
in a drive of PC. Then the following
icon will appear in the drive selection.
3. Connect the MINI USB terminal of the USB cable to the MINI USB port of
the GPS navigator and the standard USB terminal to the USB Host port of PC.
4. After the PC finds new hardware, double click the Mobile Device drive in
the selection area to enter the memory of GPS navigator for data transmission.
5. After transmission, unplug the USB cable.
[Attention] For data safety back up the navigator data
[Note] If MASS STORAGE is selected while the GPS navigator is connected
with PC, other operations will be suspended.
[Attention] The following operations will stop suspend the communication of
the system and PC and unsaved data will be lost.
Summary of Contents for MN100
