1033576B-5/15
ATTACHMENT
HARDWARE CAN
LOOSEN OVER TIME.
CHECK AND TIGHTEN
IF NECESSARY, BEFORE
EACH USE.
MAINTENANCE
The Viper has a
self-lubricating internal
mechanism.
it is not necessary to add
lubrication.
DO NOT TRANSPORT
BICyCleS WITh
attached baby seats,
panniers, wheel covers,
or full bike covers.
Test bike stability by
Tugging on fork leg.
K e e P T h e S e I N S T R u C T I O N S !
BeFORe DRIvING AWAy:
•
check the security of the forks; close the lever completely.
•
close the wheel strap tightly against the rear wheel.
•
Tighten the hex key on the rear crossbar.
•
if Viper is mounted between the towers, and has been repositioned along the
crossbar, remember to close the red cover, and tighten the hex key again.
•
don't forget your front wheel!
if forks move out of the skewer:
Open the lever and tighten the
adjustment knob more.
THE LEVER should close with firm
resistance against the forks.
Refer to
CHECK THE
REAR WHEEL.
Tighten the strap
if needed.
To release the
strap, push the
red button.
OFF-ROAD
DRIvING
is not
recommended
and could
result in
damage to
your vehicle
or your bike.
