background image

1033429B-/21

• never drive off-road with bicycles loaded.
• Do not install on trailers, campers, or RVs.
• Do not position bicycle tires near vehicle’s hot exhaust.
• Do not install if spare tire causes interference with 

bikes or folded carrier.

• before driving away always check that all hardware has 

been fully tightened.

BIkES:

• Make sure your tires are filled to recommended pressure 

found on the tire.

• Do not carry tandem or recumbent bikes.
• Do not transport bicycles with attached baby seats, 

panniers, wheel covers, full bike covers or motors.

Important Load LImItS:

HItCH Load IS LImItEd to 45 LBS. pEr BIkE.

InStaLL tHIS 

produCt on 2" 

and 1 1/4" HItCH 

rECEIvErS onLy.

Remove this rack before entering an automatic car 

wash, and when not in use.

MaInTEnancE: periodically use non-water soluble 

lubricant on moving metal parts. Use a soft cloth with water 

and mild detergent to clean rubber parts.

In addition, some undersized 

receivers may not accept this 

product. If you do not know the 

capabilities of your hitch receiver, 

consult an automotive professional.

• Do not use with a    

hitch-extender.

• Only use the included  

2” hitch adapter.

Technical aSSiSTance or replacemenT parTS:

Go online: www.yakima.com

contact your dealer or call

(888) 925-4621

monday through Friday

7:00 am to 5:00 pm pST

k E E p   t H E S E   I n S t r u C t I o n S !

Attachment hardware can loosen over time. Check before each use, and tighten if necessary. 

Failure to obey load limits can result in property damage, personal injury, or death.

This product is covered by YakIMa’s

“Love It Till You Leave It” Limited Lifetime Warranty

To obtain a copy of this warranty, go online to www.yakima.com

or email us at [email protected]

or call (888) 925-4621

Summary of Contents for StickUp








Reviews: