![background image](http://html2.mh-extra.com/html/yakima/stickup/stickup_installation-instruction_3473123004.webp)
1033429B-4/21
InStaLL wHEEL trayS.
• Insert cap screw
through washer, and
through holes on tube.
•
Install second washer
and nyloc nut.
•
Tighten using
supplied wrench, and
supplied hex wrench.
rEpEat For SECond FIXEd wHEEL tray.
prEparE For LoadIng.
Tuck strap into slot at
rear of wheeltray.
Release wheelstrap
by pressing the
lever on the buckle.
pull knob.
Raise Mast.
pull wheel hoop
apart. put in place
around wheeltray
as shown below.
Release letting wire rest in
hole, and slot of wheeltray.
Insert into
opening of tube.