1033332A-4/15
a
• The box should not slide
on the bars.
• Open the box and tighten
levers if necessary.
CHECK INSTALLATION BEFORE DRIVING AWAY
CLOSE THE BOX:
Pull the lid down.
LOCK THE BOX FOR
A SECURE CLOSURE!
LOCK
UNLOCK / OPEN
LOCK REPLACE *
TO OPEN THE BOX, unlock it. With the key still inserted, raise
the lid. The key cannot be removed while the box is open.
• Overstuffing the box
will prevent closure.
• Check the closure by
pushing up on the lid.
* See 11a below.
• Push the core completely into the housing.
• Turn the key to a horizontal position.
• Hold the core with the tip of your thumb
and pull out the gold key. The lock should
remain in the housing.
REPLACEMENT LOCK FOR SAME-KEY-SYSTEM® USERS:
Yakima SKS® locks purchased separately. (If you wish to install matched-key locks; keep this instruction for replacement lock installation).
• Insert lock key and rotate the lock to
align lock depression with point on rim.
• REMOVE lock key.
• Insert gold-toned key (from kit
purchased separately).
Remove key
with lock
attached.
Insert the gold key into the
new lock, and install.
Keep the depression
aligned to the point.
Make sure installation
is secure by tugging at
box.
