1033546B-5/18
ATTACH SKILIFT TO
UNIVERSAL MOUNT
CLOSE CARRIERS WITH
FIRM PRESSURE
VERIFY THE CLOSURE!
t 6TFCVUUPOIFBETDSFX
t 5JHIUFOXJUIIFYXSFODI
t "UUBDIIFYCPMUBOEIFYLFZUIFOUJHIUFO
t -PPTFOBOZCBJMTDSFXTUPSFQPTJUJPO
mounting brackets for better fit.
ATTACH SKILIFT
TO CARRIER
TIGHTEN FRONT
BASE SCREWS
Tighten any loose bail screws
to secure the brackets to the
crossbars.
t 1VMMVQXBSEPOVQQFSTFDUJPOPG
carrier to see if the carrier can open.
t *GJUPQFOTBQQMZNPSFQSFTTVSFXIFO
closing the carrier.
On some housings, you
must rotate the moving
parts behind the housing.
You may need to rotate the small hole inside the lock
housing so that the point on the lock core will align.
Use the inserted key
to install the locks into
the lock housings.
IMPORTANT
Push the core all the way into the housing.
Hold the core with the tip of your thumb as
you pull out the non-numbered
Control Key
.
5IFMPDLTIPVMESFNBJOJOUIFIPVTJOH
Use a key to
dislodge the
black plastic
plug from the
lock housing.
INSTALL SKS LOCKS
*OTFSUUIFOPOOVNCFSFE
Control Key
into the lock core.
