![background image](http://html1.mh-extra.com/html/yakima/multimount/multimount_manual_3375890002.webp)
1032731C-2/9
FOR YAKIMA
ROUND BARS:
FOR SQUARE
BARS:
If you have SQUARE BARS,
loosen the tabs by bending
them repeatedly.
FOR OTHER
BARS:
Remove the tabs with
scissors or pliers.
MightyMount attachments
purchased separately. (Your
bars may not be shaped as
sampled.)
Attach SnapArounds (or MightyMounts).
Remove pad insert from
MultiMount.
Insert bolt through
MultiMount.
Re-insert pad. Pad may be left out for
larger loads.
Turn the MultiMount over to
ensure that hooked edge of
pad is caught on the bottom
ridge of MultiMount.
Press the pad
into place.