1033426B-2/15
Remove the
tabs with
scissors or
pliers.
Loosen the tabs in the
SnapArounds by bending
them repeatedly.
ROUND
do you have - square - round - or faCtory Crossbars?
FACTORY BARS
SQUARE
Attach four SnapArounds to the
front crossbar (2 per saddle).
Attach four MightyMounts to the
front crossbar (2 per saddle).
Follow the Universal MightyMount instructions and
refer to this instruction for correct installation.
UNIVERSAL MIGHTYMOUNT
#03590
(SQUARE continued)
If your MightyMounts require
bar caps, install them now.
ROUND / SQUARE:
FACTORY BARS:
• Push bolts through
the saddles and into
the MightyMounts.
• Tighten bolts with
MightyMount
wrench.
install seCond set of saddles or rollers.
CEntER CRAFt on SAddlES
• Place craft in saddles.
• Adjust position of
saddles as needed.
• Completely tighten all
bar attachments.
load your Craft
loosen attachment hardware
completely before sliding
saddles along crossbars.
tighten all bar attachments.
SADDLES:
• Repeat installation for second
set of saddles,
YAKIMA HULLYROLLERS:
• Follow installation instructions
in HullyRollers kit.
• Push bolts through
saddles and into
SnapArounds.
• Attach hex keys
and tighten.
