80-13-037-Rev2
4/4
CENTRE LIGHT BAR
Centre light bar and bracket assembly on Platform by ensuring there is an equal distance from the
Platform corners as shown.
6
SECURE LIGHT BAR TO PLATFORM
Secure light bar and bracket assembly to
the Platform by tightenting each Nyloc Nut
to 4Nm using a 10mm Socket Wrench or
Spanner.
7
NOTE -
Ensure that position of light bar, or multiple light bars, complies with relevant state legislation.
ADJUST LIGHT BAR AND TIGHTEN SCREWS
8
Adjust light bar to preferred angle then
tighten light bar hardware installed in Step 3
according to the manufacturer’s instructions.
Installation is now complete.
Ensure all screws are regularly checked
and tightened to ensure minimal bounce
and maximum safety.
Ensure all wiring is retained according
to Light Bar manufacturer instructions.
www.yakima.com.au
YAKIMA PRODUCTS, INC.
4101 Kruse Way
Lake Oswego, OR
97035-2541
USA
888 925 4621
YAKIMA EUROPE
Twentehaven 7
3433 PT Nieuwegein
The Netherlands
+31 2080 81425
YAKIMA AUSTRALIA PTY. LTD
17 Hinkler Court
Brendale, QLD 4500
Australia
1800 143 548