Yakima LOCKN'LOAD Instructions Download

Page: 1 / 4

80-13-037-Rev2

1/4

• Please read instructions carefully before installation.

• Check the contents of kit. Contact your YAKIMA dealer if any parts appear missing or damaged.

• Clean your Platform prior to fitting the LOCKN’LOAD Platform Inboard Light Bracket Kit.

• Place these instructions in the vehicle’s glove box after installation is complete.

FIRST TIME INSTALLATION

KIT CONTENTS

ITEM COMPONENT

QTY

Inboard Light Bar

Bracket Right Bend

Inboard Light Bar

Bracket Left Bend

Nyloc Nut

Washer

T Bolt

PLATFORM AND LIGHT BAR SOLD SEPARATELY

MAX LOAD RATING: 8KG

LOCKN’LOAD

PLATFORM INBOARD LIGHT BRACKET KIT

• Allen Key

• 10mm Socket Wrench/Spanner

TOOLS REQUIRED:

Summary of Contents for LOCKN'LOAD

Page 1: ...racket Kit Place these instructions in the vehicle s glove box after installation is complete FIRST TIME INSTALLATION KIT CONTENTS ITEM COMPONENT QTY 1 Inboard Light Bar Bracket Right Bend x1 2 Inboar...

Page 2: ...of the slot starting at one end and working across the length of the strip Installation is the reverse and should be confirmed by hearing an audible CLICK when it is fully installed 2 LOOSELY ATTACH B...

Page 3: ...ts Washers and Nuts to the brackets as shown 4 POSITION LIGHT BAR INTO PLATFORM Position light bar and bracket assembly into the underside channel of Platform as shown 5 Once in position use an Allen...

Page 4: ...ST LIGHT BAR AND TIGHTEN SCREWS 8 Adjust light bar to preferred angle then tighten light bar hardware installed in Step 3 according to the manufacturer s instructions Installation is now complete Ensu...