09-13-592-Rev2
3/4
SECURE HIGH LIFT JACK
Secure your high lift jack
onto the Padlock Bracket
using the M10 x 40 mm Hex
Screw, M10 Spring Washer
and M10 Washer as shown.
4
With the high lift
jack securely in place,
swing the clamp down
over the jack arm and
tighten the M10 x
30 mm Hex Screw.
The jack can be secured with a padlock
(not supplied) as shown for added security.
NOTE -
Padlock Bracket shown
SECURE BRACKETS - PLATFORM
Secure both Brackets onto the Platform via the Spring
Nuts using 2 x M8 Socket Head Capscrews 20 mm, 2 x M8
Spring Washers and 2 x M8 Washers per bracket as shown.
Tighten all Capscrews with supplied Allen Key to 4-5 Nm
3
SECURE BRACKETS - LockNLoad BAR
Secure both Brackets onto the Platform via
the Spring Nuts using 2 x M8 Socket Head
Capscrews 25 mm, 2 x M8 Spring Washers
and 2 x M8 Washers per bracket as shown.
Tighten all Capscrews with
supplied Allen Key to 4-5 Nm
