![background image](http://html1.mh-extra.com/html/yakima/locknload-track-mounting-kit/locknload-track-mounting-kit_manual_3365599004.webp)
28-13-010_8000316_Rev4
4/14
ALIGN TRACK
Place Track into roof channel, ensuring there is a 2 mm spacing
from end of trim to Track both front and rear as shown.
Apply lengths of Masking Tape along window and door seals.
This prevents drill swarf from getting caught.
APPLY MASKING TAPE
2 mm
2 mm
SPOT DRILL RIVET HOLES
With the help of an assistant, hold track down firmly in roof channel. Using
the supplied 4.9 mm Drill Bit, start spot drilling each rivet hole in the Track
from the rear of the vehicle working consecutively frontward.
Ensure the
Track does not move during this process by maintaining downward pressure on
the Track.
Once complete, remove Track taking care not to scratch vehicle.
Drill frontward
Vehicle Front
Vehicle Rear
8
9
10