28-13-010_8000316_Rev4
1/14
ITEM
COMPONENT
QTY ITEM
COMPONENT
QTY
1.
Track Ranger/BT-50 Right Hand Side
x1
6.
Rivet
x16
2.
Track Ranger/BT-50 Left Hand Side
x1
7.
4.9 mm Drill Bit
x1
3.
Track Nut Plate
x4
8.
M6 Hex Screw
x8
4.
M6 Washer
x8
9.
Track End Cap Front Left & Rear Right x2
5.
M6 Spring Washer
x8
10.
Track End Cap Rear Left & Front Right x2
1
2
3
8
4
7
6
5
9
9
10
10
• Pencil
• Tape Measure
• Masking Tape
• Rivet Gun
• Drill Bit Stop
• Scissors
• Knife
• Mastic Silicone Sealant
• #2 Phillips Head Screwdriver
• Zinc Rich Cold Galvanising Coating
TOOLS REQUIRED:
• Vacuum Cleaner
• 10 mm Open Ended Spanner
• 13 mm Socket or Spanner
• Thick Cardboard Strips
• Power or Cordless Drill
• Rubber Mallet (Optional)
LockNLoad Track Mounting Kit
LNL Track Ford Ranger GEN3&GEN4 / Mazda BT-50 GEN2
Double Cab 2011+
TRACK MOUNT HEAVY DUTY ROOF RACK SYSTEM
LEG AND BAR COMPONENTS SOLD SEPARATELY
8000316
®
®
MAXIMUM PRODUCT LOAD RATING: 100 kg
IMPORTANT:
•
LOAD = WEIGHT OF PLATFORM or BARS + MOUNTING ACCES CARGO
•
PLEASE REFER TO VEHICLE MANUFACTURER SPECIFICATIONS FOR MAX ROOF
LOAD CAPACITY OF VEHICLE. THE LOWEST LOAD RATING APPLIES.
•
OFFROAD RATING: SCAN QR CODE FOR LOCKNLOAD LOAD RATING GUIDE.
REDUCTIONS MAY APPLY.
!
•
Please read instructions carefully before installation.
•
Check the contents of kit. Each spine has the last four digits of the kit’s part number lasered in.
Contact your YAKIMA dealer if any parts appear missing, incorrect or damaged.
•
Clean your roof thoroughly prior to fitting the LockNLoad RuggedLine.
•
Place these instructions in the vehicle’s glove box after installation is complete.
FIRST TIME INSTALLATION
KIT CONTENTS
