6100015154_9812176 _Rev3
4/6
ASSEMBLE RUGGEDLINE HARDWARE
Assemble the 16 mm M6 Socket Head Capscrew and
M6 Washer as shown and place into all 3 mounting
holes on bottom tabs of RuggedLine. Ensure
hardware and holes align with the holes on roof.
7
8
9
SECURE RUGGEDLINE
SPINE TO PLATE
Using an Allen Key, tighten
the M6 Socket Head
Capscrew to the vehicle roof.
FACTORY SNORKEL
RuggedLine can be installed in conjunction with a factory Snorkel.
The Ruggedline Spine can sit on top of the Snorkel bracket.
!
MOUNTING RUGGEDLINE
POSITION RUGGEDLINE ON VEHICLE ROOF
Referring to the left-right orientation on top of each Spine, carefully place one side
of the RuggedLine onto vehicle roof as shown. Line up the mounting holes on the
bottom tabs to those exposed on the roof.
Front of vehicle
