6100014323_9812172_Rev2
7/9
Min. 700 mm
NOTE -
Bar Slot Covers to be inserted
with flat side visible
BAR FITMENT
Bar placement should be a minimum of 700 mm apart from one another.
4
INSERT INFILL
Cut infill into four pieces according to the measurement taken in Step 3.
Insert into underside channel of front and rear bar ends as shown.
5
INSERT SLOT BOLT AND SLOT PALTE
Insert the Load Bar Slot Plate and the Load Bar Slot Bolt into
the RuggedLine Spine. To secure the bolt, use the M8 washer
M8 x 1.25 Nylock nut underneath the Spine trim.
6