Landing Pad #3
1033030A-1/6
Part #1033030 Rev A
You may need to remove
your vehicle’s factory
crossbars and slats.
Check to see if Landing
Pad location will cause
interference. Refer to
your vehicle’s owner’s
manual for details on
factory rack removal.
RECOMMENDED TOOL:
Measuring Tape
Refer to YAKIMA Control Tower instructions for important warning and load limitations, and YAKIMA’s limited warranty.
BEFORE YOU BEGIN:
It is recommended
that you remove the
factory crossbars.
For removal, refer to your
vehicle owner’s manual.
TO REMOVE FACTORY-INSTALLED RACKS:
• Open rear hatch door.
• Pry up the track cover-plate.
• Pushing tower lever
open, slide vehicle’s
crossbar off.
