![background image](http://html.mh-extra.com/html/yakima/hullraiser/hullraiser_manual_893729003.webp)
1033397A-3/12
aTTaCh hex keys
inserT bolTs inTo large holes in base
Make sure bolts are fully seated in base.
• Use longer
hex bolts with
hex wrench
from kit.
• TIGHTEN
COMPLETELY.
• Continue at
step 7.
MightyMounts must use kit #8860007
available from your YaKIMa dealer.
Foam pads can be
moved up or down, or
offset to support boat
at contact points.
adjusT pads
tIGHten
coMPLeteLY.
load The boaT, Tie iT down
• Loop strap through
HullRaiser.
• Bring straps up and
over until they hang
in front of the boat.
• Slide buckle up
until it hangs at top
edge of boat.
• Thread end of strap
around tower or
crossbar.
• Press open buckle.
• Insert end of strap.
to tighten
straps, hold
and pull.
seCure sTraps