background image

1033524A-5/15

KEEP THESE INSTRUCTIONS

On some vehicles, 
hatch interference 
is unavoidable. 

Use caution when 
opening your hatch.

IF YOUR VEHICLE 

HAS A REAR HATCH:

BE SURE ALL HARDWARE IS 

SECURED ACCORDING TO 

INSTRUCTIONS. FAILURE TO 

PERFORM SAFETY CHECKS 

BEFORE DRIVING AWAY 

CAN RESULT IN PROPERTY 

DAMAGE, PERSONAL INJURY, 

OR DEATH.

ATTACHMENT 

HARDWARE CAN 

LOOSEN OVER TIME. 

CHECK AND TIGHTEN 

IF NECESSARY, 

BEFORE EACH USE.

Periodically 

check the knobs 

inside the box 

and tighten if 

necessary.

• Do not remove or adjust thumb 

wheels.

• Simply loosen red knobs and 

remove box from crossbars.

To retain the adjustments for 

your vehicle, leave thumb 

wheels tightened.

REMOVING THUMBWHEELS 

WILL CAUSE DISASSEMBLY OF 

LEVER/CLAMP MECHANISM.

BOX CARE:

Use a clean soft cloth. Wash with mild soap and water. 

Polish with automotive type wax and UV protectant to 

prevent color fade.

LOCK MAINTENANCE:

Spray a small amount of lubricant into lock mechanism 

once a month.

AUTOMATIC CAR WASHES:

Do not enter car wash with box installed on vehicle.

KEEP YOUR SECOND KEY IN A SAFE PLACE!

CARE AND MAINTENANCE

CAUTION

TO REMOVE CARGO BOX:

READ THESE WARNINGS!

IF YOU NEED FURTHER 

TECHNICAL ASSISTANCE

OR REPLACEMENT PARTS

Contact your dealer, or visit 

www.yakima.com, or call

(888)925-4621

Monday through Friday,

7:00 AM to 5:00 PM, PST

THIS PRODUCT IS COVERED

BY YAKIMA’S

“LOVE IT TILL YOU LEAVE IT”

LIMITED LIFETIME WARRANTY

TO OBTAIN A COPY OF THIS WARRANTY, GO 

ONLINE TO 

WWW.YAKIMA.COM OR EMAIL US AT

 [email protected] 

OR CALL (888) 925-4621

• With gear box adjusted to your vehicle, 

simply reload onto car, tighten red 
knobs and check for tightness.

TO REINSTALL:

Summary of Contents for GEAR BOXES






Reviews: