![background image](http://html.mh-extra.com/html/yakima/freshsesh/freshsesh_quick-start-manual_893701002.webp)
1033546B-2/18
CROSSBAR
SPREAD
SKIS AND BOARDS
UNDER 170 cm:
Crossbar spread must be
between 12” (30cm) and 24” (61cm)
SKIS AND BOARDS
OVER 170 cm:
Crossbar spread must be
between 12” (30cm) and 36” (91cm)
YAKIMA Q TOWERS: DO NOT REPOSITION YOUR TOWERS!
WORK ON A FLAT SURFACE
Open carrier (they open two ways):
LIFT BOTTOM OF BUTTON…
PUSH TOP OF BUTTON…
OPEN
-OR-
t
Some factory bars may
require the long bail
screws.
t
Screws must extend
below bail.
OK
IF SCREWS ARE TOO SHORT,
USE THE LONGER SCREWS
INCLUDED
In some cases, the bails
may not be parallel.
FACTORY BARS:
CHECK FOR PROPER SCREW LENGTH
REMOVE ONE BAIL SCREW
REMOVE BASE SCREW
Use hex wrench.
t
Use hex wrench.
t
Loosen the
remaining screw,
but leave it in place.