![background image](http://html1.mh-extra.com/html/yakima/freshsesh-powderhound/freshsesh-powderhound_manual_3195990002.webp)
1033546B-2/18
CROSSBAR
SPREAD
SKiS anD BoarDS
unDer 170 cm:
crossbar spread must be
between 12” (30cm) and 24” (61cm)
SKiS anD BoarDS
oVer 170 cm:
crossbar spread must be
between 12” (30cm) and 36” (91cm)
YaKima Q toWerS: Do not repoSition Your toWerS!
work on a fLat SurfaCe
Open carrier (they open two ways):
LiFt Bottom oF Button…
puSH top oF Button…
open
-or-
•
Some factory bars may
require the long bail
screws.
•
Screws must extend
below bail.
ok
if screws are too short,
use the longer screws
included
In some cases, the bails
may not be parallel.
faCtory barS:
CheCk for proper SCrew Length
remove one baiL SCrew
remove baSe SCrew
Use hex wrench.
•
Use hex wrench.
•
Loosen the
remaining screw,
but leave it in place.