1033503E-6/21
Insert strap end into buckle.
Install lock core.
Secure rear wheel.
If forks move out of the skewer, or bike isn’t stable:
• Open cover, loosen red knob until forks slip onto
skewer. Tighten red knob, close lever.
• Lever should close with
firm resistance
against forks.
Tug on bike fork.
Check to make sure bike is secure.
If you have purchased a lock, follow
lock core instructions to install.
Pull strap through
wheel spokes.
Do not let strap push
against valve stem.
Move the
ratchet tab up
and down to
tighten strap.
BEFORE DRIVING AWAY
•
CHECK REAR WHEEL.
Tighten the strap if needed.
•
CHECK THAT BIKE
FORK IS SECURE.
•
PERIODICALLY CHECK THAT KNOBS
ARE ADEqUATELY TIGHTENED.
NOTE:
Always
check your base system to ensure crossbar stability!
