1033437B-/15
If your vehIcle's hItch Is 1 1/4":
remove the 2" hItch adapter,
and the plastIc sleeve.
Remove the bolt from
the adapter using
the hex wrench.
Remove the
adapter, and
sleeve from the
tongue.
for 2" hItches: proceed
to next step.
Use this
hole.
Install tongue.
push the tongue into the hitch
plate, aligning the holes.
• Install hex bolt and a flat washer.
• Add a second washer, attach a nut.
Insert tongue Into
vehIcle's hItch.
IF SPARE TIRE CAUSES
INTERFERENCE, DO NOT
USE THIS PRODUCT!
Align the holes in the receiver
to the holes in the tongue.
•
TIgHTEN with adjustable wrench.
Install large bolt, lock-washer, and washer.
•
Install safety pin.
•
install bolt, lock-washer, and washer
from right side of receiver.
