28-13-335-Rev1
4/4
SECURE TOOL
Secure tool within the Shovel Holder by closing the top claw down over tool handle and pushing
it down as far as it can go. The Rubber pad within the lower claw should be fully depressed to
ensure a firm hold.
If desired, lock Shovel Holders
with Keys provided.
6
TOOL REMOVAL
To release, unlock the
unit using the keys
provided if needed, and
squeeze the side tabs
on the top claw while
pulling it upwards.
7
Unlocked
Locked
x2
x2
Unlocked
Locked
INSTALLATION ONTO
MOUNTING BRACKET
The Tee Nuts can be used to
install the Shovel Holder onto
the Prorack Voyager Recovery
Tracks Mounting Brackets as
shown and following Steps
3 - 7.
8
x2
