1033306B-1/12
Safety Kit
Part #1033500 Rev.B
Slide light into bracket until it
snaps into place.
PoweR
Button
AlwAys AttAch both lights And flAg to your loAd.
• Comply with laws regarding extended loads.
• Carry two extra batteries (size AAA) for lights.
• Remove light cover with a flat tool.
• Install 2 AAA batteries
(not included).
• Snap on the cover.
bAtteries:
Assemble:
• Use a screwdriver
to remove the
screw.
• Attach the brackets
to the last pivot arm.
AttAch brAckets:
• Position the lights
away from the
center of the carrier.
• TIghTen SCRewS.
NOTICE: If the light will not work after installing the batteries, reverse the direction of the cover.
light
position:
holdup plus 2
fourtimer
