![background image](http://html.mh-extra.com/html/yakima/8004029/8004029_manual_893624002.webp)
1033087D-2/12
1.1
1.2
1.3
1.4
1.5
1.6
Place pads
onto bases.
Attach pads to
bases with
plugs.
Plugs can be used only once.
If you reconfigure the bases,
see your Yakima Dealer for
replacement plugs # 8890058.
FIRST, what kind of crossbars do you have?
ROUND
BARS
SQUARE bars
Read on.
FACTORY bars
MightyMounts…
CONTINUE TO STEP 2
Attach two SnapArounds in opposite
directions on each bar.
CHOOSE
INSTALLATION
ON VEHICLE.
Large round holes
in bases must
face the rear of
the vehicle.
Remove
one base
top and
bottom.
• Reinstall bases
with square holes
and round holes
aligned.
• TIGHTEN
completely.
MIGHTYMOUNTS
must use kit #8860007.
See your dealer.
Loosen the tabs
by bending
them
repeatedly.
Remove the tabs with
scissors or pliers.
Attach SnapArounds or MightyMounts
in the same direction on each bar.
CONTINUE
TO STEP
1.3