9
Press longer
Press longer
Fix screw for
Tape Guide
Fix screw for
Tape Guide
Position to lubricate
MEMO Function
While operating, memorize the number of present cutting.
■
Press AUTO/MANUAL BUTTON longer and display 4 digit.
■
Press
＋
BUTTON.
・
Transfer the data for the number of present cutting.
・
The data transferred is not deleted even if switching off.
■
If pressing AUTO/MANUAL BUTTON longer, display the cutting length.
Reset the Number of Cutting Pieces to ZERO
■
Press AUTO/MANUAL BUTTON longer and display 4 digit.
■
The number will be ZERO if pressing
−
BUTTON.
■
Display will change to cutting length if pressing AUTO/MANUAL BUTTON
longer.
Maintenance
■
Please clean up with a piece of cloth dipped in the detergent.
■
Keep clean for the path of tape.
・
Make sure whether there is no waste of tape glue on Roller
and Blade.
■
Find oil accessories and apply it to blade cutters by using
some sort of cotton swab.
■
When removing the waste of tape glue on blade cutters,
clean up in order to avoid not scratching the blade edge after
unscrew as shown right figure.
■
Basically, blade replacement should be done by manufacturer.
・
Please do not disassemble by yourself. We may not accept
repair and parts replacement if you do disassemble.