設定例：100枚
SELECT
SELECT
SELECT
START
SELECT
SELECT
START
AUTO
MANU
Confirm the cutting length
Confirm the cutting length
Example of
Display:A 100mm
Example of
Display:A 100mm
Example of
Display:A 100pcs
Example of
Display:A 100pcs
Press longer
Press longer
4 digit number
4 digit number
MANUAL MODE
AUTO MODE
A～F
A～F
8
Preset Mode
A buzzer will sound when the number of setting pieces is completed.
You can use the mode either MANUAL or AUTO.
This setting is 999 pcs maximum.
■
Press SELECT BUTTON and select the cutting length from A to F and 4
digit number.
■
Press SELECT BUTTON longer and Display Lcon mode.
■
Press SELECT BUTTON shorter and P mode is ready.
・
Display P and 3 digit as shown on right side.
■
Press
＋
or
−
BUTTON to set the number of cutting pieces.
■
Press AUTO/MANUAL BUTTON to select the mode function.
■
Cutting piece will be ready if pressing START BUTTON.
・
When use in manual, press START BUTTON again after taking.
・
When use in auto, another one will come out automatically.
■
The setting number will be decreasing after every cutting.
■
A buzzer will sound when it reaches 0.
・
Return to the setting number after buzzing sound.
・
Please press AUTO/MANUAL BUTTON when changing the function.
・
When use in auto and remove the cutting piece while buzzing sound,
another one will come out automatically at the same time sound finishes.
It will be minus 1 on the display.
Loop Mode
When setting the number of cutting and press START BUTTON, it will keep
cutting without stopping.
This setting is 999 pcs maximum.
■
Press SELECT BUTTON and select the cutting length from A to F and 4
digit number.
■
Press SELECT BUTTON longer and Display Lcon mode.
■
Press
＋
or
−
BUTTON to set the number of cutting pieces.
■
After pressing START BUTTON, it will begin the countdown and keep
cutting without stopping.
・
A buzzer will sound and stop when it reachs 0.
・
If you want to stop, please press START BUTTON.
If pressing START BUTTON again, it will resume.
P Mode Operation
L Mode Operation