VXA-100 A
VIATOR
P
ILOT
O
PERATING
M
ANUAL
33
MENU
(
“SET”
)
MODE
MENU Listing
A listing of the Menu items available via the SET
mode may be found below.
SQL
Function: Squelch Level Setting
Available Values: 0 ~ 8
Default Setting: 6
Select a setting for this Menu item which just silences
the receiver when no signal is present. Use the low-
est setting which will keep the receiver quiet between
incoming transmissions.
MCLR
Function: Memory Channel Clear
To Clear a Memory channel:
1. Recall the Memory channel (MR mode) which
you wish to clear.
2. Select the Menu Item
MCLR
.
3. Press the
VOLUME
knob, then rotate the
CHAN-
NEL
selector knob to recall the memory chan-
nel to be erased (“
SET
xx” will appear on the
display).
4. Press the
VOLUME
knob, then turn the
CHAN-
NEL
selector knob one click to change the dis-
play to “
CLR
xx”.
5. Press and hold the (inner)
VOLUME
knob for 2
seconds to exit.
Important Notice: An “erased” channel cannot be
restored, and “
CH"OO1
” cannot be erased, as it is
used for “Priority Channel” operation.
RESM
Function: Scan-Resume Mode Setting
Available Values: CAR/5
Default Setting: CAR
In the “CAR” (Carrier Drop) mode, the scanner will
remain halted for as long as there is a carrier present
on the channel; after the carrier drops at the end of
the other station’s transmission, the scanning will
resume.
In the “5” (5-Second Pause) mode, the scanner will
halt for five seconds only, after which scanning will
resume (whether or not the other station is still trans-
mitting).
