VXA-100 A
VIATOR
P
ILOT
O
PERATING
M
ANUAL
10
To set 118.275 MHz, you do not need to press
the final “5” in the frequency:
[
1
]
à
[
1
]
à
[
8
]
à
[
2
]
à
[
7
].
r
You may also turn
the top panel’s (outer
ring)
CHANNEL
se-
lector knob to choose
the desired operating
frequency. The chan-
nel frequency will
appear on the LCD.
r
To change frequency
in 1 MHz steps, press
the [
F
] key momen-
tarily, then rotate the
CHANNEL
selector
knob to select the
MHz digit desired.
Press [
F
] once more to resume normal channel
selection in 25-kHz steps.
r
If you enter a frequency in the “NAV” band (108-
117.975 MHz), the “VOR” operating mode will
be selected.
O
PERATION
r
Rotate the
V O L -
UME
knob to set the
volume level. If no
signal is present,
press and hold the
MONITOR
button
for 2 seconds; back-
ground noise will now be heard, and you may
use this noise to set the
VOLUME
knob for the
desired audio level. Press the
MONITOR
button
momentarily, to silence the noise and resume nor-
mal (quiet) monitoring.
r
Press and hold the
LAMP
button for 2
seconds, to illumi-
nate the display and
keypad continuously.
To disable the illumi-
n a t i o n, p r e s s th e
LAMP
button momentarily.
r
To turn the radio off, press and hold in the
PWR
switch for 2 seconds.