background image

The optional SU-1 Barometric Pressure Sensor 
unit permits monitoring of sudden weather 
changes by monitoring atmospheric pressure. 
Although not designed  for  precise pressure 
measurements, it can be a valuable tool for 
alerting you to possibly-
dangerous changes in 
weather conditions.

The VX-6R/E includes a host of features ideally 
suited for use in the outdoor environment, especially 
in search-and-rescue situations!

The supplied FNB-80LI (7.4 V/1400 mAh) 
provides up to 5 Watts of power output on both 
the 144 and 430 MHz bands. This high battery 
capacity provides a typical operating time of 7 
hours, depending on operating conditions.

In addition to full operation on the 144 and 430 
MHz Amateur bands, the VX-6R/E provides a 
wide range of monitoring excitement, thanks to 
its receiver s incredible frequency coverage of 
504 kHz to 998.99 MHz. We recommend the use 
of an external antenna for best performance on 
particular bands of interest, such as Shortwave. 
Cellular coverage is blocked and non-restorable.

Easy access to WiRES Internet Linking system 

via 64 special DTMF memories plus SRG (Sister 
Radio Group) one-digit access without touching 
a DTMF key 

Microphone Gain adjustment 

Key Beep level adjustment 

PTT Delay, to 

minimize wind noise right after the PTT switch is 
pressed, especially when using a VOX headset 

CW Training feature that can send five-

character Morse Code groups, to help you 
improve your code proficiency.

Channel counter function for determining the 

frequency  of a nearby station 

Smart Search 

automatic 31-channel  scanning/loading system 

10 dB Attenuator for use in strong-signal 

environments 

Time-Out Timer (TOT) that will 

disengage transmission after programmed time 
interval (to prevent interference to others caused 
by accidental "stuck microphone" condition 

Busy Channel Lockout (BCLO) feature prevents 

transmission when the current frequency is in 
use 

RF Squelch keeps receiver muted until a 

signal exceeding a certain S-meter reading  is 
received 

16-digit, 10-memory DTMF Autodialer 

for Autopatch use 

Automatic Repeater Shift (ARS) 

Opening "Splash Screen" message is programmable 

Wide range of available options.

The Two-Tone CTCSS Paging function utilizes a 
pair of alternating subaudible tones for selective 
calling. The LCD will indicate if a call came in 
that you missed, allowing you to return the call.

The new "Wake-Up" battery saver feature 
provides unparalleled preservation of battery 
current. With "Wake-Up" engaged, "WAKEUP" 
will appear on the display but otherwise the 
transceiver is turned completely off; every 5 to 30 
seconds the VX-6R/E will turn itself back on and 
check for activity on the current operating 
frequency. If no activity 
is found, the radio will 
go back to sleep for 
another 5 to 30 seconds.

The wide array of high-speed scanning features 
of the VX-6R/E provide you with many avenues 
of monitoring pleasure. Among the scanning 
features are:

VFO Scanning of the entire band or a programmed 

(PMS) band segment, with the ability to skip over 
constant-carrier "nuisance" channels.

Memory Scan of all memories, two types of 

Name Tag "wild card" scanning, scanning of memories 
just on a particular band, scanning of specially-
designated memories only, and scanning of the 
PMS memories. You can also designate certain 
memories to be skipped during scanning.

Scanning within a particular Memory Bank.

Scanning of multiple Memory Banks via the 

"Memory Bank Link" mode.

Additional battery saving features include:

Automatic Power-Off (APO), that turns the radio 

off after a programmed period of keystroke activity.

Password Feature, that lets you engage a four-

digit password requirement for operation; this 
can prevent children or other unauthorized users 
from turning your radio on and draining the battery.

Receive Battery Saver, that turns off most transceiver 

functions but periodically (0.2/0.3/0.5/1/2 sec.) 
checks the current operating frequency for activity.

TX Battery Saver, that automatically turns the 

transmitter power down when you are in contact 
with an extremely strong local station.

On Timer, that lets you program the time of day 

when the radio will automatically turn on, eliminating 
the need to leave it on during times when you 
won t be available to use it.

DC Voltmeter, that lets you monitor the status 

of the internal battery or external power source.

Red and Greed LEDs, plus 
the LCD, provide real-time 
monitoring of the status 
of battery charging.

The optional FBA-23 Battery Case permits 

emergency operation using two AA Alkaline 
batteries (not supplied.) For emergency transmission, 
a power output of 0.3 Watts is available, or 0.05 
Watts on the "Low" power setting. For receive-

only operation, a pair of AA cells will provide 
approximately 15 hours of operation.

If you connect the E-DC-6 External DC Cord, or 

the E-DC-5B DC Cable with Cigarette Lighter 
Plug, you can operate the VX-6R/E at full power 
and charge the battery at the same time.

The EAI feature lets you and your support team 
configure your radios so that, in the event of a 
climbing or hiking accident that leaves one of you 
incapacitated, someone else can command your 
VX-6R/E to transmit without you pressing the 
PTT, allowing the others to use your signal to 
perform direction finding and effect a rescue.

An "Emergency" function is also provided that 
will transmit your Callsign on the UHF Home 
Channel, while simultaneously flashing the CW 
ID in bright white light on the transceiver s LED 
and beeping the CW ID loudly from the speaker. 

In an emergency, the transceiver’s 
LED may be engaged continuously 
in its "Bright White" mode, instead 
of the usual red or green color, 
and may be used as a signal 
lamp or flashlight. 

The VX-6R/E is rated to JIS7 specifications for 
submersion (up to 30 minutes at a depth of up to 
three feet), and because the microphone jack is 
sealed against water ingress, you can even use 
the CMP460 Speaker-Microphone while maintaining 
the submersibility of the VX-6R/E!

HIGH       LOW3     LOW2      LOW1

5W          2.5W       1.0W       0.05W

0.3W                     0.05W

  FNB-80LI

SU-1

Outdoor-ready Features including Waterproof 
Rating, Emergency Automatic ID (EAI) system, 
and Weather Sensor Capability

Five Watts of Power Output, using 
High-Capacity Lithium-Ion Battery (supplied)

Wide-band Receiver Coverage 
for Catching All the Action!

Performance Features for the 
Experienced Hand-Held User! 

Three Powerful Emergency Features

Convenient Selective Calling and Paging Features!

Versatile Scanning for the Monitoring Enthusiast!

Big-Radio Features in a Compact Package!

Outstanding Power-Management Features

New Two-Tone CTCSS Paging

Auto-Range Transponder System (ARTS)

EAI Feature: Ideal for Outdoor Operation!

Easy-to-Use Ultra-Bright Emergency Flashing LED

Emergency Feature

50-Tone CTCSS Tone Squelch and 
Digital Code Squelch Systems

New "Wake-Up" Feature Checks for 
Activity when Radio is Turned Off!

Charger Information Display

Power Output/Power Source Chart (Approximately)

Battery Operating Times (Approximately)

FNB-80LI or EXT DC

(  )220 MHz/USA Version

FBA-23 
2 "AA" Alkalines

Band

Battery Case

144 MHz                       7 hours                      6.5 hours

430 MHz                                         6 hours

Receive Only                                  15 hours

Note:

Operating times may vary depending on operating conditions, 
and are based on a duty cycle of 6 seconds of transmission at 5 
Watts, six seconds of reception at 50% audio level, and 48 
seconds of standby operation.

Barometric Pressure

Altitude

Waterproof Connectors 
and Microphone Jack

ARTS uses the power of DCS signaling to provide 
a  handshake  capability between two ARTS-
equipped radios, to verify communication range. 

For everyday repeater and public-service operations, 
full-featured CTCSS and DCS Encoder/Decoder 
systems are built into every VX-6R/E. DCS 
Inversion is also provided, and the CTCSS 

Reverse Tone  capability can also mute your 

receiver when a particular CTCSS tone is 
received (helpful if more than one repeater is 
within range, and you want to null out one of 
them). CTCSS and DCS Tone/Code Search are 
also provided, along with an alarm bell feature. 

    Compact Polycarbonate Resin and Aluminum  
    Die-Cast Case with Solid Waterproofing Seal

     (guaranteed at depth of up to 3 feet for 30 minutes)

(1.5 W)         (1.0 W)       (0.5 W)       (0.2 W)

Weather Sensor Capability

Submersible Mic Plug

Reviews: