background image

Optional Accessories
Accessories

 MH-25B7A

Hand Microphone

 MH-43A7

Hand Microphone
(Noise Canceling)

  MH-43B7

DTMF Keypad Mic

 MLS-100

External Loudspeaker

  FP-1025A

AC Power Supply

  CT-71

PC Programming Cable
(CT-29 + CT-70)

  F2D-9

2-Tone / DTMF

  LF-1

DC Line Filter

  VTM-20

VX-Trunk II Trunking
Mobile Logic Board

 CE-35

Programming Software
(IBM PC/compatibles only)

   

Summary of Contents for VX-4000 Series

Page 1: ...ecoder is built in as standard A 104 standerd digital codes programmable DCS encoder decoder is built in as standard Important channel frequency data is stored in EEPROM and flash memory on the CPU and is easily programmable by dealers using a personal computer and the Yaesu CT 71 Programming Cable and CE 35 Software Front panel 1 2 3 4 5 6 7 8 9 10 11 12 13 14 CONTROL CONNECTORS 1 TX Indicator Th...

Page 2: ...wn during the previous operating session Transmitting To transmit wait until the BUSY indicator is off the channel is not in use and press the PTT Push To Talk switch on the side of the microphone the TX lamp will glow red While holding in the PTT switch speak across the face of the microphone in a clear normal voice level and then release the PTT switch to receive Automatic Time Out Timer If the ...

Page 3: ...ailable as a Secondary accessory to prevent accidental activation Fuse Replacement If a fuse is blown before replacing see if you can determine if it was caused by something outside of the radio perhaps a short circuit due to a worn cable or pigtail near the radio Contact your Ysesu dealer at once if you do not find the cause Replace fuses only with the same type installed This is device complies ...

Page 4: ...rophone Noise Canceling MH 43B7 DTMF Keypad Mic MLS 100 External Loudspeaker FP 1025A AC Power Supply CT 71 PC Programming Cable CT 29 CT 70 F2D 9 2 Tone DTMF LF 1 DC Line Filter VTM 20 VX Trunk II Trunking Mobile Logic Board CE 35 Programming Software IBM PC compatibles only ...

Reviews: