Yaesu VR-5000, Operating Manual

Page: 26 / 64

VR-5000 O
PERATING
M
ANUAL
24
Naming Memory Groups
1. Press the [ V/M
(
MW
) ] key, if needed, to enter the memory mode.
2. Recall the memory group to which you wish to append a label, then press the [
BANK
]
key.
3. Confirm that the cursor is on the “ BANK TAG ”
menu, then press the [ ENT
(
SET
) ] key.
4. Program the alpha-numeric “label” which you
wish to recall using the DIAL knob and key-
pad, as described previously.
5. When you have completed the creation of the
label, press the [
ENT
(
SET
) ] key.
6. Rotate the DIAL knob to set the cursor to the “
END
” menu selection, then press the
[
ENT
(
SET
) ] key.
7. Confirm that the cursor is on the “ WRITE ” menu option, then press the [ ENT
(
SET
) ]
key.
8. The memory group naming process is now complete.
Protecting Memories (Inhibits the Editing of Memorized
Channels)
You may wish to “Protect” a certain Memory Channel’s data, to prevent accidental data
change. With Protection activated, you will not be able to edit or replace that channel’s
data.
To Protect a channel’s data:
1. Recall the Memory Channel to be protected.
2. Press the [
F
] key momentarily, then press the [
V/M
(
MW
)
] key.
3. Rotate the
DIAL
knob to set the cursor to the “ END ” menu selection, then press the
[
ENT
(
SET
)
] key.
4. Rotate the DIAL knob to set the cursor to the
“
PROTECT
” menu, then press the [ •
(
BEEP
)
]
key to change its setting to “ PROTECT .”
5. Rotate the DIAL knob to set the cursor to the
“ WRITE ” menu option, then press the
[
ENT
(
SET
)
] key to protect the channel’s data.
If you set the “
PROTECT
” menu to “
FREE
” in step 4, the memory protection feature will be
disabled.
Memory Operation