19
VL-2000 Operating Manual
Operation
So2r F
eATure
The SO2R (Single Operator Two Radios) feature allows
you to receive the two signals by the two transceivers
simultaneously, when connects the two radios to the
VL-
2000
. Furthermore, you to operate the
VL-2000
without
changing the
INPUT
switch. The
VL-2000
switches the
input to the transceiver side which transmitted automati-
cally, regardless the
INPUT
switch setting.
To activate the SO2R feature, turn “on” the
SO2R
switch
on the rear panel of the
VL-2000
.
n
oTe
r
The
VL-2000
Automatic Antenna Tuner works
only to the transceiver which connected to the
INPUT jack that is determined by the
INPUT
switch.
r
Cannot select the same antenna in
INPUT 1
and
INPUT 2
while SO2R feature is activated.
A
dvice
Even if the
SO2R
switch is “off”, you can con-
nect the two transceivers deservedly. However,
you must switch the
INPUT
switch to the position
which is the transceiver that is transmitted manu-
ally and you can not receive the signal with the
other transceiver while the transceiver is transmit-
ted.
AnTennA direcT F
eATure
The ANTENNA DIRECT feature outputs the INPUT
2 signal to the
ANT DIRECT
jack directly after having
passed the Linear Amplifier and the Automatic Antenna
Tuner. As a result, the transmit signal does not pass a
complicated antenna change circuit, to keep the loss at
the minimum.
To activate the ANTENNA DIRECT feature, turn “on”
the
DIRECT
switch on the rear panel of the
VL-2000
.
i
mporTAnT
n
oTe
When activates the ANTENNA DIRECT feature,
the all ANT LED (
ANT 1
~
ANT 4
) turns “off”,
confirming that the ANTENNA DIRECT feature
has been activated.
FCC ID: K6620321X70
Vertex Standard Co., Ltd.
