![background image](http://html2.mh-extra.com/html/yaesu/m-1/m-1_operating-manual_3095352009.webp)
7
Controls & Connections
M-1 Operating Manual
Adjusting
1. Press the [
SCOPE
] key to enable the graphic equalizer display mode.
r
The [
SCOPE
] key LED is OFF while the graphic equalizer mode is displayed.
2. Press the number [
1
] or [
2
] key to select the desired memory.
Condenser microphone memory
Dynamic microphone memory
r
The selected memory number will be illuminated in blue.
3. Turn the graphic equalizer setting knobs below the display, using the
included adjustment tool. Fine-tune each individual audio band to the
desired sound quality.
Graphic equalizer setting knobs
Bass
Treble
r
The 9 frequency bands can be adjusted in steps of 0.5 dB.
r
The adjusted values are stored to the memory in real time.
r
The transmitted sound also depends on the frequency characteristics of the
transceiver.
DUAL key
When this key is pressed, the audio outputs from both the capacitor micro-
phone and the dynamic microphone are blended together.
r
The [
C
] or [
D
] button will light in red for the microphone selected before the DUAL
key was pressed. The other microphone button will light in orange.
r
The [
1
] or [
2
] or [
THR
] buttons will also be illuminated.
C/D key
These keys switch between the condenser microphone and the dynamic
microphone.
[
C
] key: Switches to the condenser microphone ([
C
] LED lights up red)
[
D
] key: Switches to the dynamic microphone ([
D
] LED lights up red)
r
When the DUAL key is pressed, the two microphones operate simultaneously.
Summary of Contents for M-1
Page 1: ......