28
Memory Operation
Moving Memory Data to the VFO
Data stored on memory channels can easily be moved to the VFO.
Note:
For details, refer to the Advanced Manual (download from the Yaesu website).
Memory Only Mode
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO operation is impossible.
Note:
For details, refer to the Advanced Manual (download from the Yaesu website).
Masking Memories
There may be situations where you want to “Mask” memories so they are not visible
during memory selection or scanning. (except for Memory Channel “1”, the Priority Chan-
nel, and the Home Channel).
1. In the Memory Recall mode, press
and hold the [
V/M
(
MW
)] key, then
rotate the
DIAL
knob to select the
memory channel you wish to mask.
2. Press the [
BAND
(
SQL
)] key.
The erase confirmation screen ap-
pears.
3. Press the [
BAND
(
SQL
)] key.
The previously selected memory
will be “masked”.
Note:
Press any key, other than [
BAND
(
SQL
)], to cancel the memory mask.
Unmasking Memories
1. To Unmask a hidden memory, in the Memory Recall mode, press and hold the
[
V/M
(
MW
)] key.
2. Rotate the
DIAL
knob to select the masked memory number.
3. Press the [
BAND
(
SQL
)] key to restore the memory channel data.
