21
Advanced Operation
Digital Personal ID (DP-ID) feature
Every C4FM digital transmit communication contains the individual ID information (Radio
ID) of each transceiver. The DP-ID function uses this individual ID information.
When communicating with another transceiver, if the DP-ID of the stations are registered
in each other‘s transceivers, they can communicate even if the DG-ID numbers are
different.
DP-ID: bbbbb
DG-ID: TX02 RX02
DP-ID: ccccc
DG-ID: TX01 RX01
DP-ID: aaaaa
DG-ID: TX01 RX01
DP-ID list
B station's DP-ID “bbbbb”
A station and C station do not register
the DP-ID of each other’ s transceiver
on both transceivers, but each
transceivers may communicate
because the same DG-ID is set to
both transceivers.
A
B
C
DP-ID list
A station's DP-ID “aaaaa”
DP-ID list
B station's DP-ID “bbbbb”
Each transceivers may communicate
even if the Digital Group ID (DG-ID) is
a different setting because A Station
and B station register the DP-ID of
each other’ s transceiver on both
trasnceivers.
B Station may not receive the C
station's signal because B station does
not register the C station's DP-ID.
C station may receive the B station's
signal because C station register the B
station's DP-ID.
Registering the DP-ID to a DR-2X digital repeater
Note:
To register the transceiver DP-ID in the System Fusion II, DR-2X C4FM digital
repeater, refer to the instruction manual of the DR-2X.
By registering the transceiver’s DP-ID in the DR-2X, you can remotely control the settings
and functions of DR-2X. Remote control cannot be performed from a transceiver that
does not register the DP-ID, so it is possible to securely manage repeaters.
DR-2X Remote Control Feature
•
Activate the repeater operation
•
Deactivate the repeater operation
•
Set the repeater to C4FM mode
•
Set the transmit power
•
Voice Message Control (Rec / Play / Stop)
•
Set the Emergency Call
