Yaesu FTM-6000R, Operating Manual

Page: 12 / 48

10
[SQL back ] key
• Press the [ SQL back ] key, then rotate the DIAL knob to adjust the squelch level. The squelch level may be
adjusted to mute the background noise when no signal is present.
• Press the [ SQL back ] key to return to the previous screen.
• If the [ SQL back ] key is pressed and held while the memory channel is displayed, the information regis-
tered in the memory channel at that time will be switched to VFO mode.
DIAL knob
Change the frequency or select the memory channel.
• Press the DIAL knob to enable setting the operating band frequency in 1MHz units.
• Press and hold the DIAL knob to enable setting the frequency in 5MHz units.
• Press the [
SQL back
] key, then rotate the
DIAL
knob to adjust the squelch level.
[BAND grp ] key
VFO mode
Each key press switches the operating frequency band.
Band Selectable Frequency Range
AIR 108MHz - 137MHz
144MHz 137MHz - 174MHz
VHF 174MHz - 400MHz
430MHz 400MHz - 480MHz
UHF 480MHz - 999.95MHz
Memory mode
Each time the [ BAND grp ] key is pressed, only memory channels of the same frequency band are automati-
cally recalled as a group as shown below.
Bands that have not been stored are not displayed.
Group Name Selectable Memory Channels
ALL
No icon display
All memory channels.
AIR
“A” icon blink
AIR band (108MHz to 137MHz) memory channels only.
VHF
“V” icon blink
VHF band (137MHz to 174MHz) memory channels only.
UHF
“U” icon blink
UHF band (400MHz to 480MHz) memory channels only.
Other
“O” icon blink
174MHz to 400MHz and 480MHz to 999.995MHz
memory channels only.
[V/M mw ] key
Press briefly
• Pressing each time switches between VFO mode and memory mode.
• When a memory channel is recalled, the “ ” icon and the memory channel number are displayed, such
as “ 001 ”. The last operated memory channel is recalled.
Press and hold
Press and hold for over one second to write to memory.
[PMG pw ] key
Press briefly
Each press each time switches between PMG (Primary Memory Group) mode and memory or VFO mode.
Press and hold
Press and hold for over one second to write to PMG memory.