Yaesu FTM-500DR, Operating Manual

Page: 49 / 84

47
Displaying a list of memory channels in memory mode
Turning the DIAL knob in memory mode usually increases or decreases the mem-
ory channel number. Rotating the DIAL knob automatically displays the memory
channel list and allows you to recall the desired memory channel while checking the
contents of multiple memory channels.
1. Press and hold the
FUNC knob.
2. Touch [ 21 MEMORY LIST MODE ].
Or rotate the FUNC knob to select the [ 21 MEMORY LIST MODE ], and then
FUNC knob.
3. Rotate the FUNC knob to set “ ON ”.
4. Press the DIA L knob, SUB DIAL knob or PTT switch to save the settings and
return to normal operation.
To return to normal up / down operation, set “ OFF ” in step 3 of the above operation.
Recall only memories in the same frequency band (Band)
using the memory auto grouping (MAG) function
With the memory auto grouping ( MAG ) function, only memory channels in the same fre-
quency band (Band) can be called.
In the memory mode, each time the
key is pressed,
only memory channels of the specified frequency band are
automatically recalled as a group, as shown below:
DIGITAL / ANALOG TRANSCEIVER FTM - 500D
DISP S-DX
All memory channels
（AIR Band）
108MHz - 137MHz
memory channel
137MHz-174MHz
memory channel
400MHz-480MHz
memory channel
174MHz - 400MHz
480 MHz - 999.995MHz
memory channel
When “ ” is selected, the MAG function is turned OFF and all memory channels can be
recalled.
Group Selectable Memory Channels
All memory channels.
AIR band (108 - 137MHz) memory channels only.
144MHz band (137 - 174MHz) memory channels only.
430MHz band (400 - 480MHz) memory channels only.
174MHz to 400MHz and 480MHz to 999.995MHz Memory channels.