Yaesu FTM-350R - APRS, Manual, Page: 27 / 56

FTM-350R O
PERATING
M
ANUAL
25
GPS O
PERATION
(
R
EQUIRES
O
PTIONAL
GPS A
NTENNA
U
NIT
)
“Point” memory
The FTM-350R has 16 “point” memories (four channels in each of four groups),
which store the positon (Longitude/Latitude) and the date.
When your vehicle nears one of the “Point” memories, the “Nav” pop-up window
will open for ten seconds even if another page is being displayed.
You may customize the length of time the window opens via Set mode item “ H03
NAVI POPUP ” in the “ NAVI ” group. In addition, the “date” may be changed to a
place or name, using the following procedure:
1. Press the [
P y LIST
] key to open the “Point” memory list.
2. Rotate the left side [
DIAL
] knob to select the “Point” memory “date” to be
changed.
3. Press the left side [ DIAL
] knob to show the detail data of the “Point” memory.
4. Press the left side [ DIAL
] knob again to enable editing of the stored data.
5. Rotate the left side [ DIAL
] knob to toggle the point alarm function ON/OFF.
When this selection is set to “OFF”, the “Nav” pop-up window does not open
even if your vehicle nears that “Point” memory location.
6. Press the [
Œ
] key to move the cursor to the “date” area, and then press the
[
CLR
] key to clear previous data.
7. To enter the desired name, rotate the
left side [ DIAL
] knob to select a
character/number, and press the [
‹
]
or [
Œ
] key to move the cursor.
8. Press the [
ENT
] key to overwrite the date setting.
9. Press the [
BCK
] key to return to the “GPS” page, and then press the [
NAVI
]
key again to initiate navigation.
Important Note
When the GPS Antenna Unit is first turned on, it may take several minutes to
complete a fix of your position. This is normal, as the GPS unit is downloding
“almanac” information from the GPS satellites.