Yaesu FTM-3200DR, Advance Manual

Page: 5 / 36

5
Advanced Operation
FTM-3200DR Advance Manual
Split Tone Operation
The FTM-3200DR can be configured to operate in a “Split Tone” system via the Setup
menu, to facilitate operation on repeaters using a mix of both CTCSS and DCS control.
1. Press and hold in the [
MHz
(
SETUP
)] key for
one second to enter the Set mode.
2. Rotate the DIAL knob to select “ SQL EXP
41 ”.
3. Press the [ MHz
(
SETUP
)] key, then rotate
the DIAL knob to select “ON”.
Default: OFF
VOL
DIAL
SQL
TXPO D W M W SETUP
REV D/A V / M M H z
4. Press the [ MHz
(
SETUP
)] key momentarily,
then rotate the DIAL knob to select “ SQL
TYPE 42 ”.
5. Press the [ MHz
(
SETUP
)] key, and then ro-
tate the DIAL knob to select the following
parameters.
D CODE: DCS Encode only (the “DCS” icon
will blink during operation)
T DCS: Encodes a CTCSS Tone and
Decodes a DCS code (the “T”
icon will blink and the “DCS” icon
will appear during operation)
D TONE: Encodes a DCS code and
Decodes a CTCSS Tone (the “T
SQ” icon will appear and “DCS”
icons will blink during operation)