9
Installation
FTM-3100R/E Operating Manual
Base Station Installation
The FTM-3100R/E is ideal for base station use as well as in mobile installations. The
FTM-3100R/E is specifically designed to integrate into your station easily, using the fol-
lowing information as a reference.
AC Power Supplies
Operation of the FTM-3100R/E from an AC line requires a power source capable of pro-
viding at least 20 Amps continuously at 13.8 Volts DC. The FP-1023 (USA market only)
and FP-1030A (USA/EXP market only) AC Power Supplies are available from your Yaesu
dealer to satisfy these requirements. Other well-regulated power supplies may be used
as well, if they meet the above voltage and current specifications.
Use the DC power cable supplied with the transceiver to make the power connection to
the power supply. Connect the
RED
power cable lead to the
POSITIVE
(
+
) power supply
terminal, and connect the
BLACK
power cable lead to the
NEGATIVE
(
–
) power supply
terminal.
Rear panel
Power cable
(DC 13.8 V)
Black
Direct current
power supply
AC power
outlet
DC power supply
cable (supplied)
Red
Fuse holder
