28
Miscellaneous Settings
FTM-3100R/E Operating Manual
Displaying the Supply Voltage
Display the Power Supply voltage.
Note:
See Setup Menu Item “
7 DC VOLT
” on page 29.
Displaying the Temperature
Indicates the current temperature inside the transceiver.
Note:
See Setup Menu Item “
36 TEMP
” on page 30.
Band Edge Beeper
The FTM-3100R/E will automatically “beep” when the receiver’s band edge is encoun-
tered during scanning (either in standard VFO scanning or during PMS operation). You
may additionally enable this feature (band edge beeper) when the frequency reaches the
band edge while selecting the VFO frequency manually, using the
DIAL
knob.
Note:
For details, refer to the Advanced Manual (download from the Yaesu website).
