Yaesu FTM-200DE, Instruction Manual

Page: 4 / 57

3
When operating APRS using the GPS function
In order to use the GPS satellite data for your own position information, press and hold the
[ F menu ] key → [ 93 MY POSITION SET ] → press the DIAL knob to “ GPS ”.
Factory setting value: GPS
Then proceed to “
Setting your own station callsign
” (page 4).
When operating APRS without using the GPS function
When operating APRS without using the GPS function, follow the procedure below to
manually set the clock and position information.
y
Setting the position information
Enter the position information of your own station manually.
1
Press and hold the [ F menu ] key → [ 93 MY POSITION SET ].
2
Press the DIAL knob.
3
Rotate the DIAL knob to select [ MANUAL ] and then
press the [ SQL back ] key.
Factory setting value: GPS
4
Rotate the DIAL knob to select [ 94 MY POSITION ] and
then press the DIAL knob.
A screen to enter the position information of your own
station will be displayed.
5
Press the DIAL knob.
6
Rotate the
DIAL
knob to select “
N
(North Latitude)” or
“
S
(South Latitude)” press the
DIAL
knob .
7
Enter the latitude using the DIAL knob.
8
After entering the latitude, press and hold the DIAL knob.
9
Rotate the DIAL knob to select “ LONGITUDE ” and press
the DIAL knob.
10
Rotate the DIAL knob to select “ E (East Longitude)” or “ W (West Longitude)” and
press the DIAL knob.
11
Enter the longitude using the DIAL knob.
12
After entering the longitude, press and hold the DIAL knob.
13
Press the [ DISP ] key or press the PTT switch to return to the operating screen.
MANUAL
93
94
95
96
MY POSITION SET
MY POSITION >
MY SYMBOL >
POSITION COMMENT
APRS
25 MY POSITION
APRS
LATITUDE :
N 0°00.00’ (’00”)
LONGITUDE :
E 0°00.00’ (’00”)