27
Setting the address of the digipeater route
After selecting PATH 1 - PATH 4 / FULL 1 / FULL 2 under [14 DIGI PATH] in the set-up
menu, enter the specific address information (callsign and ALIAS).
A maximum of 2 addresses for PATH 1 - PATH 4, and a maximum of 8 addresses for FULL
1 - FULL 2 can be registered.
Example: Enter the address information of PATH 1
1
Press and hold the [
F menu
] key → [
84 DIGI PATH 1
] → Press the
DIAL
knob.
Switch to the address selection screen.
2
Rotate the
DIAL
knob to select the [
ADDRESS 1
], then press the
DIAL
knob.
The address input screen will be displayed.
3
Enter the address.
Refer to “Text input screen” (FTM-200DR/DE Operating Manual) on how to enter text.
4
Press and hold the
DIAL
knob.
The entered callsign will be displayed in the setting field under [
ADDRESS 1
].
5
Rotate the
DIAL
knob to select the [
ADDRESS 2
], then press the
DIAL
knob.
6
Enter the address.
7
Press and hold the
DIAL
knob.
The entered callsign will be displayed in the setting field under [
ADDRESS 2
].
8
Press the [
DISP
] key or press the
PTT
switch to return to the operating screen.
