13
Connecting to a Faraway Station Using WIRES-X
Useful functions in digital mode
Using preset channels
Programming (presetting) a channel frequency allows you to easily connect to a local
node.
By sharing a channel frequency with other nodes, you can connect the transceiver to a
local node even while you are out. This is useful for a group to operate a station.
z
Presetting a channel
1
Press and hold
for over one second.
Displays the Setup menu.
2
Rotate the DIAL to select
[7 WIRES-X]
, then press
.
Displays the menu list.
3
Check that
[1 RPT/WIRES FREQ]
is displayed, then
press
.
Displays the selection items.
4
Rotate the DIAL to select
[PRESET]
, then press
.
Displays the frequency setting screen.
Tip
The default setting is MANUAL.
5
Rotate the DIAL to select the frequency.
Tips
• Rotating the DIAL changes the frequency by the
increments specified from the Setup menu.
• Pressing and holding
allows you to set the
frequency in 1 MHz units.
• The default settings are 146.550.
6
Press and hold
for over one second.
Sets the frequency and returns the screen to the
frequency display screen.
