88
FTM-10SR O
PERATING
M
ANUAL
The
FTM-10SR
Menu Mode, already described in parts of many previous chapters, is easy
to activate and set. It may be used for configuration of a wide variety of transceiver param-
eters, some of which have not been detailed previously. Use the following procedure to
activate the Menu mode:
1. Press and hold the [
VOL/SEL
] key for one second to enter the Menu mode.
2. Rotate the
DIAL
knob to select the Menu Item to be adjusted.
3. Press the
key momentarily to enable adjustment of the Menu Item.
4. Rotate the
DIAL
knob to adjust or select the parameter to be changed on the Menu Item
selected in the above step.
5. After completing your selection and adjustment, press the [
VOL/SEL
] key to save the
new setting and exit to normal operation.
M
ENU
(
“S
ET
”
)
M
ODE
Menu Item
AF AUTO
AF DUAL
AF PITCH
AF PREST
AF-VFO
BEEP
BLU SAVE
BLU VOX
CLOCK
CLUB PRI
DC VOLT
DIMMER
DTMF
FKEY MOD
FKEY SEL
ID LIST
ID REG
MESSAGE
MIC GAIN
MIC PRGM
PAGER
PTT LOCK
PTT MODE
RPT ARS
RPT MODE
Function
Enables/Disables the Automatic Audio Volume Controller.
Enables/Disables the AF DUAL operation.
Select the Tone Pitch control for the received audio.
Enable/Disable the Volume Setting Alert feature.
Select the DIAL knob and display function.
Enables/Disables the beeper.
Enable/Disable the battery saver of the optional BH-1
Bluetooth
®
Headset.
Enables/Disables the
Bluetooth
®
function (requires the optional BU-
1
Bluetooth
®
Unit).
Activates/Disables the Internal Clock/Stop Watch Timer.
Activates the Club Channel Monitor.
Indicates the DC Supply Voltage.
Setting of the display’s illumination level.
Programming of the DTMF Autodialer.
Selects the category which is recalled from the top panel
/
key.
Assigns a function to the Function Key.
Programming a Member List for the Message feature.
Sets your Personal ID for the Message feature.
Programming a Message for the Message feature.
Adjust the microphone gain level.
Select the function of the microphone’s [PGM] key.
Enables/Disables the Enhanced CTCSS Paging & Code Squelch
function and setting the Receiving/Transmitting Pager Code for the
Enhanced CTCSS Paging & Code Squelch function.
Enables/Disables the locking of the PTT key when the LOCK mode
is activated.
Selects the PTT key function.
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Available Values
(
Default:
Bold Itaric
)
OFF
/ON MIN/ON MID/ON MAX
OFF
/ AM AUTO / AM HOLD/
FM AUTO/ FM HOLD/ LI AUTO
/ LI HOLD
LOW-3/LOW-2/LOW-1/
NORMAL
/HIGH-1/HIGH-2
OFF
/OV ALERT/LV ALERT/ HV
ALERT
TOGGLE/
AUTOBACK
KEY+SC
/KEY/OFF
OFF
/ON
OFF/
PTT
/VOX HIGH/VOX LOW
OFF
/ON
OFF
/AUTO/HOLD
---
DIMMER 1 ~
DIMMER 5
---
FNC
/FNC+MSG/MSG
AF DUAL, ARTS, DIMMER,
HORN 1, HORN 2, HORN 3,
HORN 4, INTERCOM, MONI,
PA
, REVERSE, SCAN, SQL
LEVL, SSCH, TCALL, TX
POWER, VOL.ITCOM
---
---
---
MIN/LOW/
NORMAL
/HIGH/
MAX
TX LOW/RPTR/SQLTYP/REV/
TSQLF/DCODE/MONI/TCALL/
SSCH/ARTS/TAG/MHz/SCAN/
CLUB/
WX
OFF
/ON
OFF
/ON
MOMENT
/TOGGLE
ON
/OFF
RPTR OFF/RPTR-/RPTR+ (
Ú
)
Item
#
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
